Contact person
Service-Hotline
en
WEBER Schraubautomaten GmbH WEBER Schraubautomaten GmbH
  • Products
    • Main Menu
    • Handheld screwdriver
      • Handheld screwdriver
      • Handheld screwdriver
        Handheld screwdriver
        WEBER's handheld screwdrivers for industrial fastening combine ergonomics and variability in every model. Highly flexible, powerful and suitable for complex screwdriving processes thanks to programmable control technology.
      • Handheld screwdriver HET
        Handheld screwdriver HET
        The intelligent HET handheld screwdriver is a powerful screwdriving system for industrial fastening. In conjunction with the C30S screwdriving control unit and the bit box, the compact handheld screwdriver is an unbeatable combination for flexible assembly workstations.
      • Handheld screwdriver HSE
        Handheld screwdriver HSE
        For complex hand-held screwdriving tasks with automatic feed. Horizontal and vertical screwdriving possible.
      • Handheld screwdriver HSP
        Handheld screwdriver HSP
        The hand-held pneumatic screwdriver with feed is characterized by its low weight and high screw-in speed.
      • Electric handheld screwdrivers ESB
        Electric handheld screwdrivers ESB
        The ESB electric handheld screwdriver is praticulary suitable for small screws and simple industrial screwdriving tasks.
    • Fixtured screwdriving systems
      • Fixtured screwdriving systems
      • Fixtured screwdriving systems
        Fixtured screwdriving systems
        Stationary screwdriving technology is used when fastening processes become more complex, cycle times shorter and quality requirements higher.
      • Fixtured screwdrivers SER / SEB
        Fixtured screwdrivers SER / SEB
        Thanks to their automatic screw feed, the SEB and SER stationary screwdrivers have short cycle times for fully automatic screw fastening. The modular design makes the feed screwdrivers very versatile.
      • Fixtured screwdriver SEV
        Fixtured screwdriver SEV
        Vacuum screwdriver with automatic feed for screwdriving with interfering edges up to 150 mm. Suitable for technical cleanliness in screwdriving processes.
      • Fixtured screwdriver SER-L / SEV-L
        Fixtured screwdriver SER-L / SEV-L
        Our feed screwdriver for lightweight robots is particularly suitable for coexisting HRC applications and processing of shank-heavy screws.
      • Fixtured screwdriver SEV-P
        Fixtured screwdriver SEV-P
        Pick & place screwdriver with automatic tool change for use with lightweight robots - applications include battery assembly and disassembly.
      • Fixtured screwdriver SEV-E
        Fixtured screwdriver SEV-E
        Suitable for screw connections with interfering contours from 150 mm. The vacuum screwdriver with slide has an automatic screw feeder.
      • Fixtured screwdriver SEM / SEK
        Fixtured screwdriver SEM / SEK
        Thanks to our vacuum technology, this stationary screwdriver can assemble DIN-compliant nuts and top-heavy screws. The SEM/SEK can therefore feed fasteners reliably.
    • Inserting and press-fitting technology
      • Inserting and press-fitting technology
      • Inserting and press-fitting technology
        Inserting and press-fitting technology
        WEBER offers innovative stationary or hand-guided systems for setting technology. These have automatic feeds or intelligent controls and enable high process forces during setting or press-fitting.
      • Fixtured insertion system PEB
        Fixtured insertion system PEB
        The automatic insertion system with automatic feeding can implement fasteners such as pins, bolts or clips with a contact pressure up to 10 kN.
      • Handheld system HPP
        Handheld system HPP
        The hand-guided HPP setting unit only requires low pressure forces to press in the fasteners. This ensures fatigue-free working.
    • Feeding systems
      • Feeding systems
      • Feeding systems
        Feeding systems
        The automation of assembly processes includes the trouble-free feeding and separation of fasteners with as little material damage as possible.
      • Step feeder ZEL
        Step feeder ZEL
        The ZEL feeding unit is the basis for technical cleanliness when feeding and separating screws, nuts or pins. The step feeder offers cycle rates of up to 0.8 seconds.
      • ZEL step feeder for large screws
        ZEL step feeder for large screws
        Feeding technology for large fasteners such as screws, nuts, or pins. Automatically feeds screws with a shank length of up to 160 mm.
      • Bowl feeder ZEB
        Bowl feeder ZEB
        The ZEB sorting bowl is suitable for conveying and separating very small screws and parts. The automatic feeder is also a robust system for difficult environments.
      • Refill hopper BB
        Refill hopper BB
        The storage of screws, nuts or pins in a belt hopper increases the autonomy of the feeding process.
      • Profile Feed Tubes
        Profile Feed Tubes
        Fasteners such as screws, pins, bolts or nuts are fed automatically via a feed hose. So-called profile hoses are used for nuts and top-heavy screws.
    • Control technology
      • Control technology
      • Control technology
        Control technology
        A process controller - also known as a screwdriving controller - controls the drive of the screwdriving system. It can actively intervene in the screwdriving process using sensors (e.g. torque sensor or depth sensor) to ensure reliable screwdriving. The screwdriving and feeding systems are controlled by a sequence controller.
      • Process controller C5S
        Process controller C5S
        The C5S process controller is ideal for simple screwdriving tasks. Parameterizable programs can be selected and executed via a customer interface.
      • Process controller C30S
        Process controller C30S
        The C30S process controller was developed to solve complex screwdriving tasks. It also offers detailed evaluations and numerous interfaces that ensure seamless integration into existing production environments.
      • Process controller C50S
        Process controller C50S
        The C50S process controller is used for complex and individually parameterizable screwdriving processes. An individual process sequence can be configured using the latest methods.
      • Sequence controller C10 / C15
        Sequence controller C10 / C15
        The C10S is particularly suitable for pneumatic manual screwdriving systems, while the C15S is ideal for simple screwdriving systems.
      • Sequence controller CU30
        Sequence controller CU30
        Our PLC sequence controller has a flexibly programmable PLC with integrated pneumatics. Simple operation is ensured by programming modules and a touch display.
      • Torque gauge M30
    • System solutions
      • System solutions
      • System solutions
      • Robot-assisted flow-drilling screwdriving system RSF
      • Setting system for sandwich structures TSS
      • Inserting system for blind rivet nuts and bolts SBM
  • Applications
    • Main Menu
    • Electromobility
      Electromobility
      With voltages in the high-voltage range, new challenges arise in the bolting of battery packs. On this page you will find WEBER's innovative solution.
    • Electrical industry
      Electrical industry
      The electrical industry relies heavily on bolted connections. The aim here is to achieve compact, high-performance results with the greatest possible technical cleanliness.
    • Mechanical engineering
      Mechanical engineering
      Manual and stationary screwdrivers from WEBER are used for full or partial automation. Discover solutions for automation in mechanical engineering under the premises of durability, flexibility, process reliability and efficiency.
    • Aviation industry
      Aviation industry
      In the aviation industry, screwdriving technology impresses with optimized, precise and adaptable screwdriving processes. Find solutions and applications in the aviation sector here.
    • Automotive and body construction
      Automotive and body construction
      Flow-hole fasteners or setting processes for blind rivet nuts are the focus of assembly processes in the automotive and bodywork sector. On this page you will find the industrial challenges and solutions for automotive production.
    • Telecommunications
      Telecommunications
      The highly dynamic telecommunications sector constantly demands new standards. Areas such as miniaturization create major challenges. Here you will find solutions for such tasks, always with a view to technical cleanliness.
    • Wood industry
      Wood industry
      Modular design and robust components are decisive factors for the wood industry. Here you will find solutions for fastening to the living raw material wood.
    • Home appliances
      • Home appliances
      • Home appliances
        Home appliances
        Strict regulations in terms of hygiene and health protection place stringent requirements on screw fittings in the household appliances sector. Discover solutions developed over many years for these areas.
      • Automated screwdriving technology for dishwashers
        Automated screwdriving technology for dishwashers
        To ensure precise, fast, and reliable screw assembly, BSH Dillingen has relied on automated screwdriving systems from WEBER for decades.
    • Medical technology
      Medical technology
      Maximum cleanliness and even sterility of devices are required in medical technology. Here you will discover WEBER solutions that not only meet the high standards in this area, but also set new benchmarks.
  • WEBER-Technology
    • Main Menu
    • Guides for automatic feeding
      • Guides for automatic feeding
      • Automated feeding – a guide
        Automated feeding – a guide
        What does automatic feeding technology mean and how are elements separated and fed? What needs to be taken into account during feeding in terms of technical cleanliness? Find out here.
      • Swivel arm
        Swivel arm
        WEBER's swivel arm technology marks the beginning of the automation of screwdriving and joining processes and is therefore part of the WEBER principle. This includes process-reliable screwdriving including fully automatic feeding.
    • Guide for automated joining processes
      • Guide for automated joining processes
      • Screwdriving systems – a guide
        Screwdriving systems – a guide
        The areas of application as well as the basics of screwdriving technology and other modern screwdriving methods are part of this guide. Among other things, it deals with the gradient method for screw connections.
      • Blind rivets – a guide
        Blind rivets – a guide
        This guide explains what is meant by setting blind rivet nuts and the advantages of this technology.
    • Guide for industrial assembly
      • Guide for industrial assembly
      • Industry 4.0 – a guide
        Industry 4.0 – a guide
        Here you can find out what impact Industry 4.0 is having on fastening and feeding technology and what changes and opportunities are arising as a result.
      • Screwdriving Technology for Robotic Applications
        Screwdriving Technology for Robotic Applications
        In this guide, you can find out how our screwdriving technology can be integrated into your system and used with robot applications, and which topics are important in robot screwdriving technology.
      • Technical cleanliness – a guide
        Technical cleanliness – a guide
        Cleanliness in complex assembly processes is a decisive factor for the quality and reliability of your products. You can find out everything you need to know about technical cleanliness in screwdriving and feeding processes in this guide.
      • What you should know about interfering edges at the screwdriving location
        What you should know about interfering edges at the screwdriving location
        What you should know about interfering edges at the screwdriving location – and how these challenges can be overcome with the right technologies.
      • Here’s how to integrate screwdriving systems for automated assembly into your production environment.
        Here’s how to integrate screwdriving systems for automated assembly into your production environment.
        How to integrate screwdriving systems into your production environment for fully automated screwdriving technology.
  • Company
    • Main Menu
    • WEBER Group
      WEBER Group
      As a globally active company, WEBER has manufacturing and sales companies around the world. Find out more about the WEBER Group here.
    • Taking responsibility
      Taking responsibility
      Quality and reliability are essential in the various areas of industrial mass production. Find out more about the values for which WEBER has stood for 60 years.
    • Our certificates
      Our certificates
      The quality of our products and services is underlined by the numerous certificates of WEBER Schraubautomaten GmbH.
    • Purchasing
      Purchasing
      WEBER quality can only be guaranteed with equally high quality from our suppliers. Find out here about the standards and requirements that WEBER places on its suppliers.
    • Press
      Press
      Find out here about news and other interesting topics from WEBER.
    • Working at WEBER
      Working at WEBER
      WEBER is constantly growing and is always looking for committed graduates, career starters and experienced employees who want to contribute to the long-term success of the “WEBER Schraubautomaten” brand.
    • Apprenticeship
  • Service
    • Main Menu
    • Services
      • Services
      • Services
        Services
        The WEBER service team takes care of you and your machines from the very first customer meeting. Find out here about the comprehensive services, training and more offered by WEBER.
      • Customer service
        Customer service
        WEBER understands “customer service” as a complete, comprehensive and competent program for process optimization. You can make an inquiry about WEBER customer service here.
      • Repair order
        Repair order
        WEBER's repair team ensures that downtimes are minimized. Find out more about our fast and reliable service here, or submit a repair request.
      • Spare parts
        Spare parts
        Even in times of fragile international supply chains, WEBER is at your side quickly and reliably with the right spare parts. Make a spare parts inquiry here.
      • Competence Center – Training
        Competence Center – Training
        WEBER offers training and instruction for employees. Find out more here, or submit a training request.
      • Complaint & Warranty
        Complaint & Warranty
        WEBER relies on early consultation with its customers to prevent any problems. Here you can find out more about complaints and quality management, or submit a complaint request.
    • Downloads
      Downloads
      Here you will find software for our products, important SAP, service and sales documents. You can also download WEBER Schraubautomaten GmbH certificates here.
    • Terms and Conditions
      Terms and Conditions
      Here you will find a brief description of our terms and conditions of business and service. All documents can be found under Downloads.
Contact
Service-Hotline
en
Homepage

Company Contact

Address Headquarter
WEBER Schraubautomaten GmbH
Hans-Urmiller-Ring 56
82515 Wolfratshausen

Way to us

T. +49 8171 406-0
E. info@weber-online.com

Service hotline

Monday to Friday
From 6.00 a.m. to 10.00 p.m.
P. +49 8171 406-444
E. service@weber-online.com

Service & After Sales

  • Services
  • Customer service
  • Repair order
  • Spare parts
  • Competence Center – Training
  • Complaint & Warranty

Products

  • Handheld screwdriver
  • Fixtured screwdriving systems
  • Inserting and press-fitting technology
  • Control technology
  • Feeding systems
  • System solutions
© WEBER Schraubautomaten GmbH
  • Legal Notice
  • Cookie-Settings
  • Privacy policy
  • AGB

Find your local Sales Representative

For general requests

P. +49 8171 406 0
E. info@weber-online.com

Service Hotline

Monday – Friday:
From 6.00 a.m. to 10.00 p.m.

P. +49 8171 406 444
E. service@weber-online.com

Service request

  • Services
  • Customer service
  • Repair order
  • Spare parts
  • Competence Center – Training
  • Complaint & Warranty

Select your desired language

  • Čeština
  • Deutsch
  • English
  • English (US)
  • Español
  • Français
  • Italiano
  • Magyar
  • Polski
  • 简体中文

Number finder

The way to your number.

Look for a 7-digit number on your WEBER product.

For controls:

Steuerungen Maschinennummer WEBER

For stationary helicopters:

Stationärschrauber Maschinennummer WEBER

For feeders:

Zuführung Maschinennummer WEBER